Nose Pieces & Core Catchers There are 8 products.

• 

  Core Catcher Stainless Steel for 2"...

  Core catchers fit between the bottom of a threaded core or liner tube and the nosepiece. They work like a hand that opens, then shuts to grip your entire sample. The slits or “fingers” on the core catchers are forced open as the core tube enters the substrate. Removing the tube causes the weight of the sample to close the “fingers” around the sample. In this way you keep a tight grip on loose, soupy material that might otherwise literally go...

  Core catchers fit between the bottom of a threaded core or liner tube and the...

  Core catchers fit between the bottom of a threaded core or liner tube and the nosepiece. They work like a hand that opens, then shuts to grip your entire sample. The slits or...

  Part # 3-2449-B33

  In Stock

  
  

  $203.50

  Select to compare

  Add to cartView
• 

  Core Catcher Stainless Steel for 2"...

  Core catchers fit between the bottom of a threaded core or liner tube and the nosepiece. They work like a hand that opens, then shuts to grip your entire sample. The slits or “fingers” on the core catchers are forced open as the core tube enters the substrate. Removing the tube causes the weight of the sample to close the “fingers” around the sample. In this way you keep a tight grip on loose, soupy material that might otherwise literally go...

  Core catchers fit between the bottom of a threaded core or liner tube and the...

  Core catchers fit between the bottom of a threaded core or liner tube and the nosepiece. They work like a hand that opens, then shuts to grip your entire sample. The slits or...

  Part # 3-2449-B31

  In Stock

  
  

  $70.40

  Select to compare

  Add to cartView
• 

  Eggshell Core Catcher for 2" Core...

  Core catchers fit between the bottom of a threaded core or liner tube and the nosepiece. They work like a hand that opens, then shuts to grip your entire sample. The slits or “fingers” on the core catchers are forced open as the core tube enters the substrate. Removing the tube causes the weight of the sample to close the “fingers” around the sample. In this way you keep a tight grip on loose, soupy material that might otherwise literally go...

  Core catchers fit between the bottom of a threaded core or liner tube and the...

  Core catchers fit between the bottom of a threaded core or liner tube and the nosepiece. They work like a hand that opens, then shuts to grip your entire sample. The slits or...

  Part # 3-2449-B14

  In Stock

  
  

  $52.80

  Select to compare

  Add to cartView
• 

  Eggshell Core Catcher for 2" Core...

  Core catchers fit between the bottom of a threaded core or liner tube and the nosepiece. They work like a hand that opens, then shuts to grip your entire sample. The slits or “fingers” on the core catchers are forced open as the core tube enters the substrate. Removing the tube causes the weight of the sample to close the “fingers” around the sample. In this way you keep a tight grip on loose, soupy material that might otherwise literally go...

  Core catchers fit between the bottom of a threaded core or liner tube and the...

  Core catchers fit between the bottom of a threaded core or liner tube and the nosepiece. They work like a hand that opens, then shuts to grip your entire sample. The slits or...

  Part # 3-2449-B13

  In Stock

  
  

  $17.33

  Select to compare

  Add to cartView
• 

  Nose Piece Stainless Steel for 2"...

  A nosepiece is a tapered tip that fits on the lower end of our 51 mm (2”) diameter threaded core tubes (one fitting our 3" (7.62mm) core tubes is also available). It penetrates the sediments and holds liner tubes and/or core catchers in place. Available two ways: in lexan plastic to avoid trace metal contamination; and in stainless steel to avoid organic contamination. Sold singly and in packs of three. Specifications: Lexan OD: 70 mm (2.75”)...

  A nosepiece is a tapered tip that fits on the lower end of our 51 mm (2”) diameter...

  A nosepiece is a tapered tip that fits on the lower end of our 51 mm (2”) diameter threaded core tubes (one fitting our 3" (7.62mm) core tubes is also available). It penetrates...

  Part # 3-2449-A23

  In Stock

  
  

  $170.50

  Select to compare

  Add to cartView
• 

  Nose Piece Stainless Steel for 2"...

  A nosepiece is a tapered tip that fits on the lower end of our 51 mm (2”) diameter threaded core tubes (one fitting our 3" (7.62mm) core tubes is also available). It penetrates the sediments and holds liner tubes and/or core catchers in place. Available two ways: in lexan plastic to avoid trace metal contamination; and in stainless steel to avoid organic contamination. Sold singly and in packs of three. Specifications: Lexan OD: 70 mm (2.75”)...

  A nosepiece is a tapered tip that fits on the lower end of our 51 mm (2”) diameter...

  A nosepiece is a tapered tip that fits on the lower end of our 51 mm (2”) diameter threaded core tubes (one fitting our 3" (7.62mm) core tubes is also available). It penetrates...

  Part # 3-2449-A21

  In Stock

  
  

  $60.50

  Select to compare

  Add to cartView
• 

  Nose Piece Lexan Plastic for 2" Core...

  A nosepiece is a tapered tip that fits on the lower end of our 51 mm (2”) diameter threaded core tubes (one fitting our 3" (7.62mm) core tubes is also available). It penetrates the sediments and holds liner tubes and/or core catchers in place. Available two ways: in lexan plastic to avoid trace metal contamination; and in stainless steel to avoid organic contamination. Sold singly and in packs of three. Specifications: Lexan OD: 70 mm (2.75”)...

  A nosepiece is a tapered tip that fits on the lower end of our 51 mm (2”) diameter...

  A nosepiece is a tapered tip that fits on the lower end of our 51 mm (2”) diameter threaded core tubes (one fitting our 3" (7.62mm) core tubes is also available). It penetrates...

  Part # 3-2449-A13

  In Stock

  
  

  $60.50

  Select to compare

  Add to cartView
• 

  Nose Piece Lexan Plastic for 2" Core...

  A nosepiece is a tapered tip that fits on the lower end of our 51 mm (2”) diameter threaded core tubes (one fitting our 3" (7.62mm) core tubes is also available). It penetrates the sediments and holds liner tubes and/or core catchers in place. Available two ways: in lexan plastic to avoid trace metal contamination; and in stainless steel to avoid organic contamination. Sold singly and in packs of three. Specifications: Lexan OD: 70 mm (2.75”)...

  A nosepiece is a tapered tip that fits on the lower end of our 51 mm (2”) diameter...

  A nosepiece is a tapered tip that fits on the lower end of our 51 mm (2”) diameter threaded core tubes (one fitting our 3" (7.62mm) core tubes is also available). It penetrates...

  Part # 3-2449-A11

  In Stock

  
  

  $20.90

  Select to compare

  Add to cartView