Titrator, Total Acidity, 0.1 To 25.0g/l/0.1g/l- Hi84502-01** (NON-RETURNABLE)

Titrator, Total Acidity, 0.1 To 25.0g/l/0.1g/l- Hi84502-01** (NON-RETURNABLE)

Titrator, Total Acidity, 0.1 To 25.0g/l/0.1g/l- Hi84502-01** (NON-RETURNABLE)

For Wine Analysis -- Test Results in Minutes

· Microprocessor-based automatic titrator specially designed for the determination of total acidity measurements in wine analysis
· Titrator, magnetic stirrer, electrode holder and reagent holder in 1 compact unit
· Pre-programmed analysis method for wine samples; results are displayed in g/L as tartaric acid
· Simple to operate - results in minutes
· High accuracy piston driven dosing system
· Automatic stirrer speed control – maintains consistent stirring speed at approximately 600 rpm regardless of viscosity of solution
· Realtime graphing with exportable data
· Log on demand – log data on up to 200 samples
· GLP feature, to view calibration data for titrator and pump
· Can also be used as a pH/mV meter
· Includes: reagents set for approximately 50 titrations, two 100ml beakers, 2000µl automatic pipette with tips,  dosing pump valve, tube set (aspiration tube with cap and dispensing tube with tip), HI1048B pH wine electrode, HI7662-T temperature probe, stir bar, one 30ml bottle of refill solution, one 5ml syringe, one 1ml plastic pipet, 2 sachets of cleaning solution for wine deposits, 2 sachets of cleaning solution for wine stains, 12 VDC adapter and instruction manual

Range, low:        0.1 to 5.0 g/L of tartaric acid
Range, high:         4.0 to 25.0 g/L of tartaric acid
Range, pH:        -2.00 to 16.00 pH
Resolution        0.1 g/L
Resolution, pH:        0.01pH
Accuracy, low range:    3% of reading or ±0.1 g/L (at 25°C/77°F)
Accuracy, pH    :    ±0.01 pH (at 25°C/77°F)
pH calibration:        1, 2 or 3 calibration points
Temperature compensation:  Manual or Automatic
Sample volume:        10ml LR/2ml HR
Method:            Acid Base titration
Principle:        End point titration:  8.20 pH
Pump speed:        10ml/min
Stirring speed:        600rpm
Log data:        up to 200 samples
Power supply:        12 VDC (included)
Environment:        0 to 50°C (32 to 122°F); RH max:  95% non-condensing
Dimensions:        235 x 200 x 150mm (9.2 x 7.9 x 5.9”)

Product is Drop Shipped

HAW-98094

$1,003.70

Add to cart

 

16 other products in the same category:

Comments

No customer comments for the moment.

Write your review

Titrator, Total Acidity, 0.1 To 25.0g/l/0.1g/l- Hi84502-01** (NON-RETURNABLE)

Titrator, Total Acidity, 0.1 To 25.0g/l/0.1g/l- Hi84502-01** (NON-RETURNABLE)

For Wine Analysis -- Test Results in Minutes

· Microprocessor-based automatic titrator specially designed for the determination of total acidity measurements in wine analysis
· Titrator, magnetic stirrer, electrode holder and reagent holder in 1 compact unit
· Pre-programmed analysis method for wine samples; results are displayed in g/L as tartaric acid
· Simple to operate - results in minutes
· High accuracy piston driven dosing system
· Automatic stirrer speed control – maintains consistent stirring speed at approximately 600 rpm regardless of viscosity of solution
· Realtime graphing with exportable data
· Log on demand – log data on up to 200 samples
· GLP feature, to view calibration data for titrator and pump
· Can also be used as a pH/mV meter
· Includes: reagents set for approximately 50 titrations, two 100ml beakers, 2000µl automatic pipette with tips,  dosing pump valve, tube set (aspiration tube with cap and dispensing tube with tip), HI1048B pH wine electrode, HI7662-T temperature probe, stir bar, one 30ml bottle of refill solution, one 5ml syringe, one 1ml plastic pipet, 2 sachets of cleaning solution for wine deposits, 2 sachets of cleaning solution for wine stains, 12 VDC adapter and instruction manual

Range, low:        0.1 to 5.0 g/L of tartaric acid
Range, high:         4.0 to 25.0 g/L of tartaric acid
Range, pH:        -2.00 to 16.00 pH
Resolution        0.1 g/L
Resolution, pH:        0.01pH
Accuracy, low range:    3% of reading or ±0.1 g/L (at 25°C/77°F)
Accuracy, pH    :    ±0.01 pH (at 25°C/77°F)
pH calibration:        1, 2 or 3 calibration points
Temperature compensation:  Manual or Automatic
Sample volume:        10ml LR/2ml HR
Method:            Acid Base titration
Principle:        End point titration:  8.20 pH
Pump speed:        10ml/min
Stirring speed:        600rpm
Log data:        up to 200 samples
Power supply:        12 VDC (included)
Environment:        0 to 50°C (32 to 122°F); RH max:  95% non-condensing
Dimensions:        235 x 200 x 150mm (9.2 x 7.9 x 5.9”)

Write your review

Categories